Infrared Swan Neck Basin Spout
Infrared sensor operated basin spout. Swan neck spout chrome plated with a brass body.
When the user’s hands enter the washing area a light will illuminate and water will dispense, water will stop when the user’s hands are removed from the sensor area. An auto shut off occurs after 55 seconds to prevent water waste from a fault or from misuse.
The tap has a single inlet connection for pre-mixed or cold water, a scratch resistant sensor window and a moisture resistant control box.
Typically 3 to 4 working days.
Control box for mains supply, with battery backup, or run from batteries (requires 4 x AA batteries)
Tested to meet the requirements of WRAS
1 year’s manufacturer’s warranty against defects
30mm tap hole required
Minimum operating pressure required 1 Bar
Maximum static water pressure 10 Bar
Our full range of infrared taps can be seen here
Usually 3 to 4 working days.
Special delivery is offered on some products and is noted on the relevant product pages.
Delivery times stated on the website are indicative of the average time it takes to deliver each product. All delivery times are based on working days and do not include weekends or Bank Holidays.
For remote areas sometimes deliveries may take a little longer than specified.
We will contact you if there are any known delays in the delivery times on your order.
All orders are despatched by the most suitable and economic method.
If you have ordered several items they may arrive separately to make sure they are delivered by the quickest and most appropriate method, and to guarantee you get the best prices.
Please note our carriers do not offer fixed time slots, and due to time constraints are not able to telephone before delivering.