Swan Neck Cup And Filler
Product Code: RUB-BOTTLEFILLER
Description
Chrome plated brass swan neck bottle and cup filler. WRAS approved to comply with local authority by-laws. For use with our drinking fountains and bottle filling fountains or as a replacement for your own drinking fountains.
Press button on off operation prevents waste of water and the high neck spout allows bottles and cups to be easily filled.
Delivery
Typically 2 to 3 working days
Tech specs
Push button to dispense drinking water
1/2" BSP tail
1/2" BSP brass back nut and rubber washer
22mm Tap hole required
Replacement cartridge available see RUB-CARTRIDGE
**All pictures shown are for illustration purpose only and may be subject to change without notice. Actual product may vary due to product enhancement.
All dimensions shown are for guidance only and may be subject to change or alteration without notice. All items manufactured or purchased separately from a third party to fit our products should be checked against the actual dimensions of the physical product before purchase. We will not be liable for third party costs and consequential loss associated with the items not fitting third party components.**
Dimensions
Delivery
Delivery
From stock usually 1 to 2 working days.
Delivery Times
Delivery times stated on the website are indicative of the average time it takes to deliver each product. All delivery times are based on working days and do not include weekends or Bank Holidays.
For remote areas sometimes deliveries may take a little longer than specified.
We will contact you if there are any known delays in the delivery times on your order.
Delivery Method
All orders are despatched by the most suitable and economic method.
If you have ordered several items they may arrive separately to make sure they are delivered by the quickest and most appropriate method, and to guarantee you get the best prices.
Please note our carriers do not offer fixed time slots, and due to time constraints are not able to telephone before delivering.